Three Compartment Cage (Crown) Wheeled Pigeon Breeding Cage
$345.00
Description
3-floor pigeon cage on wheels for breeding. Wheels make for easy transportation around the loft. Each floor has separate compartment for 3 hanging cups to be used for Grit/Water/Feed.
Measurements
Individual cages (each floor)
36W x 24L x 16.5H
Divider for water/feed/grit is 7in wide compartment for birds is 29in wide and each section has its own door.
Total Size of cage
36W x 24L x 61.5H (5ft 1.5in)
Cups
12 oz D-shaped cups.
Dropping Pans
(two to a level)16.5w x 23L
(suggestion- because these pans don’t cover the entire surface of the cage, and the edges may not fit perfectly straight together, please use a piece of cardboard or wood to prevent droppings from falling on the bird below.)
Suggested Instructions:
(You will need a pair of pliers and a second set of hands)
Step 1: Build the three white cages first. Use pliers on the U-shaped caged clips. It is usually easier to bend the short side of the clips over the wires of the cage first, then the longer edge. use 3-4 clips per upright and make the wires line up as best as you can.
Step 2: attach wheels to the two blue uprights
Step 3: space uprights far enough apart to fit the first white cage and the bottom white brace in between (this is where you may need that second set of hands) use the nuts that fit the white bottom brace and begin to tighten them to help keep the cage in place…from this point on simply work your way up.
Step 4: once all the cages are in place use the hooks and nuts to brace the white cages to the blue frame.
Step 5: Put the d cups and dropping pans in and you’re done!
(If these instructions make it sound difficult don’t be discouraged its actually rather easy.)
Related products
2GR Breeding Cage 120 Sestriere Art. 402
Sestriere 120 cm brooder cages, with plastic sides and back
2GR Gabbia Cova 120 Sestriere
120x40 cm
Item code: 402
This cage can be used as a breeding cage or a large flight/aviary cage.
The picture is for display only, each long cages (120 cm) contain:
1 White Drinking Tubes
1 White Long Feeders
Dim: cm. 122*42*44.5h/48*16.5*17.5 inch
Foldable
Stackable
Light Weight
This cage can be used as a breeding cage or a large flight/aviary cage.
2GR Breeding Cage 90 Portofino Art. 421
2GR Gabbia Cova 90 Portofino
Breeding cage 90 Portofino line of 2GR. The back and sides are closed with green plastic panels, while the front has a black metal grid. The droppings drawers and the bottom grid are white.
On the front of the cage there are 4 spring doors located at the top and suitable for placing nests and 2 larger spring doors located in the center and suitable for internal inspection. In addition, in the lower part of the front there are 4 small flaps for the positioning of the classic external feeders and two more flaps, with the corresponding guides, for the insertion of the internal feeders. The cage also has 2 drawers for the collection of droppings (white) and 2 partition grids to prevent the birds from coming into contact with the droppings. Finally, it can be divided into two equal parts by means of a special separating grid.
Accessories included: 4 ergonomic perches 4 external feeders 1 internal feeder
2 droppings collection drawers
2 horizontal separating grids for the droppings drawer,Item code: 421
The cages can be joined together to form a single 180 cm aviary with the aviary conversion kit.
The hatching cage is collapsible, takes up very little space and can be easily disassembled and stored at the end of the season. It also allows for safer shipping.
Dimensions: 36*16.5*17.5 inch
Foldable
Stackable
Light Weight
Reviews
There are no reviews yet.